戴迪斯科车辆检测感应器

更新:2017/10/19 17:22:26      点击:
  • 产品品牌   DAIDISIKE
  • 产品型号   DQSM
  • 产品描述

    DHT外观尺寸宽度50mm、高度35mm、长度看选型表。...

产品介绍

DQSM系列车辆分离光幕:

产品配置:1.发射器和接收器:发射器内置线性排列的高能量发光元件,接收器内置与发射器数量相同的接受元件,发射器和接收器的对应光电元件依次按顺序同步触发,检测光路是否导通,当汽车通过扫描区域时,部分或全部光束被遮挡,因而被检测出。

               2.控制单元:调取并处理发射器/接收器的同步扫描信号,同时检测光幕工作状态,提供多种输出信号,如:开关量输出、串口输出或模拟量输出。考虑到系统的可靠性和安装的简便性,市场上普遍使用的车辆分离光幕都是控制器内置的两箱式产品,而没有独立的外置控制器。

               3.电缆线:连接发射器/接收器与控制器的接插电缆,一般长度为5—10m。

               4.防护外罩:为不锈钢或铝合金材料,为分离器提供防护,内置电加热玻璃、温度控制器、湿度控制器,在湿度过高、温度过低时实现自动加热,以保证车辆分离器在潮湿地区、雨雪天气、寒冷季节可靠使用。

产品特点:1.集成化设计、无需控制器,简单易用;

               2.光幕高度:50mm到2840mm;

               3.光轴间距:10、14、20、25、30、40、80mm七种,其他间距可以定做;

               4.检测距离:0—5米,0—10米;

               5.LED指示灯可显示光幕的工作状态及故障状态;

               6.双NPN输出:#输出1:车辆检测信号输出;#输出2:光幕故障报警输出;

               7.运用独特算法,使光幕只检测150mm以上的物体,同时具有1mm的分辨率,既可以避免由阳光、飞、鸟、蚊虫及污泥引起的误动作,也可以可靠检测车辆挂钩;

               8.自动检测故障,并忽略(屏蔽)有问题的光束,仍能保持正常工作,同时输出报警信号;

               9.使用高能量、高穿透率光电管,便于安装维护;

              10.可以实现车辆自动分离、计数、存在检测、分类检测、确定车头时距;

              11.完全消除跟车现象,将半挂车、全挂车、单车可靠分离;

              12.专用防护外壳使用坚固的铝型材制成,保证车辆分类光幕可靠用于室外的恶劣环境;

              13.适用温度:-10℃—55℃;环境湿度:RH≤85%(20℃)

DQSM series vehicle separation screen:
Product configuration: 1. transmitter and receiver: high energy light emitter built-in linear array, the same number of built-in receiver receiving element and corresponding transmitter, photoelectric element transmitter and receiver are orderly synchronized trigger detection optical path is switched on, when the car passes through the scanning area, all or part of beam is blocked, so it is detect.
                               2. control unit: synchronous scanning signal processing and retrieval of transmitter / receiver, and inspection work, to provide a variety of output signals, such as switch output, serial output or analog output. Considering the simplicity and reliability of the installed systems, vehicle separation screen is widely used on the market are two box products built-in controller, without external controller independent.
                               3. cable: connect the transmitter / receiver and controller connector cable, the general length is 5 - 10m.
                               4. the protection cover is stainless steel or Aluminum Alloy materials, to provide protection for the separator, a built-in electric heating glass, temperature controller and humidity controller, the humidity is too high, too low temperature of automatic heating, to ensure that vehicles separator in humid areas, rain and snow, cold season and reliable.
Features: 1. integrated design, no controller, easy to use;
              2. screen height: 50mm to 2840mm;
              3. optical axis spacing: 10, 14, 20, 25, 30, 40, 80mm seven kinds, other spacing can be made to order;
              4. detection distance: 0 - 5 meters, 0 - 10 meters;
              5.LED indicator shows the working state and fault state of the screen;
              6. double NPN output: # output 1: vehicle detection signal output; output: 2 # screen fault alarm output;
              7. the use of the unique algorithm, the screen only detected more than 150mm objects, with a resolution of 1mm, which can be avoided by the sun, bird, fly, mosquito and sludge caused by misoperation, can reliably detect vehicle hook;
              8. automatically detect faults and ignore (shielded) problematic light beams that still function properly while outputting an alarm signal;
              9. use high energy and high penetration photoelectric tube for easy installation and maintenance;
             10. automatic separation, counting, detection, classification and determination of vehicle headway can be realized;
             11. completely eliminate car following phenomenon, the semi-trailer, full trailer, bicycle reliable separation;
             12. special protective shell using aluminum made of sturdy, reliable guarantee for vehicle classification screen to the harsh outdoor environment;
Suitable temperature: -10 13. C and 55 C; humidity: RH = 85% (20 C)

产品规格表:

DQLV系列规格表 光轴间距 光束 有效保护高度mm(H) 光幕高度mm(J) 产品型号
10mm(K) 8 70 130 DQLV08/10-70
10 90 150 DQLV10/10-90
12 110 170 DQLV12/10-110
14 130 190 DQLV14/10-130
16 150 210 DQLV16/10-150
18 170 230 DQLV18/10-170
20 190 250 DQLV20/10-190
22 210 270 DQLV22/10-210
24 230 290 DQLV24/10-230
26 250 310 DQLV26/10-250
28 270 330 DQLV28/10-270
30 290 350 DQLV30/10-290
32 310 370 DQLV32/10-310
34 330 390 DQLV34/10-330
20mm(K) 4 60 126 DQLV4/20-60
6 100 165 DQLV6/20-100
8 140 205 DQLV8/20-140
10 180 245 DQLV10/20-180
12 220 285 DQLV12/20-220
14 260 325 DQLV14/20-260
16 300 365 DQLV16/20-300
18 340 405 DQLV18/20-340
20 380 445 DQLV20/20-380
22 420 485 DQLV22/20-420
24 460 525 DQLV24/20-460
26 500 565 DQLV26/20-500
28 540 605 DQLV28/20-540
30 580 645 DQLV30/20-580
32 620 685 DQLV32/20-620
40mm(K) 4 120 195 DQLV4/40-120
6 200 275 DQLV6/40-200
8 280 355 DQLV8/40-280
10 360 435 DQLV10/40-360
12 440 515 DQLV12/40-440
14 520 595 DQLV14/40-520
16 600 675 DQLV16/40-600
18 680 755 DQLV18/40-680
20 760 835 DQLV20/40-760
22 840 915 DQLV22/40-840
24 920 995 DQLV24/40-920
26 1000 1075 DQLV26/40-1000
28 1080 1155 DQLV28/40-1080
30 1160 1235 DQLV30/40-1160
32 1240 1315 DQLV32/40-1240
80mm(K) 4 240 375 DQLV4/80-240
6 400 535 DQLV6/80-400
8 560 695 DQLV8/80-560
10 720 855 DQLV10/80-720
12 880 1015 DQLV12/80-880
14 1040 1175 DQLV14/80-1040
16 1200 1335 DQLV16/80-1200
18 1360 1495 DQLV18/80-1360
20 1520 1655 DQLV20/80-1520
22 1680 1815 DQLV22/80-1680
24 1840 1975 DQLV24/80-1840
26 2000 2135 DQLV26/80-2000
28 2160 2295 DQLV28/80-2160
30 2320 2455 DQLV30/80-2320
更多产品
单号网 快递单号购买